Can you have a wood burning stove without a chimney?

Spartherm stove

Can you have a wood burning stove without a chimney

Can you have a wood burning stove without a chimney, we at Hot Box Stoves are often asked this question?

The short answer to this question is both yes and no depending upon how you consider a chimney.

A wood-burning stove will always need to be connected to a flue which allows the bi-products of combustion a safe passage to the atmosphere.

How can this be done? The answer can be found below…

Free No Obligation Home Survey >>>

Twin wall chimney systems…

Hot Box can offer a range of twin wall chimney system installations that eliminate the need for a traditional masonry chimney breast or flue.

The images below depict a modern wood burner on a glass hearth, the stove is a Spartherm Passo XS, available via our Spartherm page. 

As you can see, the stove in this case does not have a chimney in this modern extension. Therefore, we have set up the appliance to be installed on a twin wall chimney system.

 

twin wall chimneymodern wood burning stove on a glass hearth with a raging fire inside the stove

Such twin wall chimney systems are a great way to install a stove. Further, they provide a seamless and gas-tight connection to the appliance, a layer of insulation between two skins of metal means that the flue gasses are always kept warm and the draught improved.

More often twin wall chimney systems are used in new build properties or extensions where it is not cost-effective or necessary to construct a masonry chimney stack.

However, should you want to see a traditional masonry stack externally, why not consider installing a twin wall inside it? Using this method, the twin wall flue is masked externally and traditional detailing can be used around roof penetrations.

Which System should I choose?

Hot Box has been installing stoves across Yorkshire for almost 10 years. Before setting up we took care to choose only the best stove installation components, we have used them since.

At Hot Box, there is only one manufacturer that provides a quality twin wall chimney system, Schiedel

It is our view that Schiedel flue components, although not the cheapest, are among the best on the market.  Further, they are designed to withstand the continuous firing temperatures of wood burning or multi fuel stoves.

Further information on their range of products is available via their website here.

Can you have a wood burning stove in a corner?

Even where a masonry chimney is available in a property some clients opt to position their stove elsewhere.

Further, a twin wall chimney system, in most circumstances, it is possible to position your stove to suit your needs.

Below, a twin wall chimney system is mounted off the top of the stove and penetrates an external wall.

How much does a twin wall chimney cost?

Costs for twin wall chimney systems can vary depending on the manufacturer. On average, the cost of a good quality system is around £100.00 per m. Bends and connection components can add up so it is best to keep thee to a minimum if possible.

Costs will also depend on how much work is needed to get the chimney system out of the building and make it comply with regulations.

For instance, taking a twin wall chimney system through a flat roof is likely to be fairly cost-effective.

Comparably, if you need to go up through a floor and then a roof the costs are likely to rise.

Considering installing a stove but don’t have a chimney? let us help and book a free survey. 

Free No Obligation Home Survey >>>

5 thoughts on “Can you have a wood burning stove without a chimney?

  1. Anthony Walker says:

    We live in an apartment with a balcony above us. There is a space where a stove can go with an external wall but does the twin wall chimney have to be a certain height away from the building or as long as it’s outside is it OK?

    Thanks,

    Anthony

    • Oliver Neal says:

      Hi

      The chimney would need to extend at least as high as the ridge of the building or if a flat roof building above any parapet. it would need to be away from opening windows and at least 2700mm horizontally from another structure that was higher.
      Please feel free to e mail some images to us and we will present a more accurate view of what may or may not be possible.

  2. Margaret clothier says:

    Would be interested in the wood burner as above with flue going diectlt out the back. Can you give me some idea of cost of supply and fitting? We live Durham do you cover this area?

  3. jimmy says:

    Hi,

    me and my partner are looking at putting a log burner into our living room. There is a fake fireplace already there but no chimney. the Fireplace is on a joining wall but is only about 1m away from the external wall. What would be the best solution for instilation of the flue?

    Thanks for your time, Jimmy

Leave a Reply

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.