Parkray Aspect 6 | Recess Installation

INSTALLATION

As with every installation, the works began with placing temporary protection from the point where our operatives enter the property through to the room where the installation was undertaken. The existing wooden beam was carefully removed and set aside before raising the two pillars on either side of the recess. The newly completed recess was lined with a fireboard and the front of the recess was plastered, ready for sading and decorating by our customers.

Once the recess was completed, the chimney was swept and lined with a 316-grade twin skin flue liner. Next, the new stove was placed in the correct position and a galvanized steel plate was fixed to the underside of the recess and sealed between the closure plate and chimney with high-temperature sealant. The customer’s new stove was connected with the liner using appropriate connection components as well as a stove pipe. The chimney flue was completed with the installation of a pot hanging cowl. Once all debris was disposed of and the area where the stove was installed was cleaned, our HETAS registered engineers performed a smoke test using the one and only Firestarter. The smoke test ensures there is an adequate degree of draw and that all connections are sealed. Finally, in accordance with building regulations, a CO/ Carbon Monoxide Alarm and a chimney notice plate were installed.

Would you like to explore your wood-burning options? Submit our free home survey request or contact us for more information.